MALARNIA LAKIERNIA PISTOLET GEMA OPTIFLEX PRO W

Very good condition, all paint shop elements work and are ready to be installed and put into operation.

The proposed set includes the elements listed below: PRELIMINARY TREATMENT TUNNEL (DEGRATING): THE PRELIMINARY TREATMENT TUNNEL is a unit of the painting line in which surface treatment of details is performed, consisting of spraying them with chemical solutions. Its purpose is to degrease and clean the surface of the details. Dimensions: - length 12,200 mm - width 1,500 mm - height 5,000 mm Holes for moving details: - width 300 mm - height 2,200 mm DRYING/POLYMERIZATION FURNACE: The OVEN is a unit of the painting line where the detail is dried and/or polymerized . Dimensions: - length 11,800 mm - width 4,700 mm - height 4,100 mm Holes for moving details: - width 300 mm - height 2,200 mm AUTOMATIC PAINT CABIN: THE CABIN is a unit of the painting line in which powder is applied to the details. By sucking air from the environment, the fans create negative pressure in the cabin section so that the sprayed powder can first settle on the painted detail and then move to the centrifugal dust collector, where the first precipitation of the powder takes place, and then to the precipitation chamber, where filtering takes place. air and overspray powder precipitation. At the exit of the centrifugal precipitator, before being discharged into the surroundings, the air is subjected to a further purification process, passing through a series of filters with a highly effective cartridge. The powder, transferred to the liquid substrate container, is automatically sifted and recirculated by the spray units, allowing it to be reused. Dimensions: - length 4,300 mm - width 1,400 mm - height 3,370 mm Holes for moving details: - width 400 mm - height 2,200 mm Final filter: Suction fan: 12,000 m3 / h 11kW Painting booth equipment: - automatic powder system OptiMatic 1 ( AS01) Gema - OptiTronic control unit (CG03) Gema - EasyFlow injector x 6 pcs Gema - OptiGun 2-A(X) (GA02) automatic gun x 6 pcs Gema - HUBO HE 270 manipulator MANUAL SPRAY CABIN: Dimensions: - length 4,300 mm - width 1,400 mm - height 3,370 mm Openings for moving details: - width 400 mm - height 2,200 mm Painting booth equipment: - Easy1-B Gema powder paint spraying device WATER DEMINERALIZATION STATION: The unit has been designed to enable complete recovery of water used in the rinsing stages by creating a closed loop. Thanks to the use of the ion exchange process, the device enables the capture of polluting factors present in the rinsing water, which is recycled with a very high degree of purity and completely demineralized. Technical data: - Recirculation efficiency 4.5 m³/h - Operating temperature 40 °C - Regeneration time 3 h 30 min - Volume of eluates 3 m³ - HCL (33%) consumption 110 l = 130 kg - NaOH consumption (30%) 120 l = 150 kg

The buyer must arrange the loading of the vehicle/machine himself.

The technical condition corresponds to age and mileage / operating hours. Personal inspection is required. Later claims shall not be taken into account.

This text has been translated using Google Translate. Veacom is not liable for any inaccuracies or misunderstandings which arise through the translation.