PRAGA UV 80 4X4 + NÁSTAVBY

ID #10432
Register
Already have an account? Login

Basic data

Name
PRAGA UV 80 4X4 + NÁSTAVBY
First registration
1/2000
Mileage
6 910 km
MOT validity
Invalid
Registration control
Completed
Vehicle VIN
TNPU212ZPXC000285
Licence plate
CLJ2562
Engine power
84 kW
Engine capacity
3192 cm3
Fuel
Oil
Transmission
Manual
Emission class
EURO 2
Eco tax
CZK 3,000
Number of seats
2
Axle configuration
4x4

Condition

The vehicle has been out of service for 5 years.
1747 number of hours worked.
Webasto heating, front suspension.
Functional before shutting down.

Superstructures:
SPREADER BODY KOBIT SYKO 2.5
KOBIT K3 SWEEPING BODY
FRONT SEGMENT SAW

ATTENTION!! The car has no valid MOT test certificate. With an invalid MOT test certificate, the vehicle is not allowed on the roads; therefore, the buyer shall always be responsible for performing the registration inspection on the car. It is prohibited to operate the vehicle on its own wheels, and should a foreign auctioneer purchase the car; it cannot be exported abroad while still being identified by an export registration number before the car is moved. The export shall be performed only after the registration control ensured by the buyer who shall hand over the documents to the seller! The company Veacom must always be informed about the arrival of the carrier at least three days in advance!!!

The technical condition corresponds to age and mileage / operating hours. Personal inspection is required. Later claims shall not be taken into account.

This text has been translated using Google Translate. Veacom is not liable for any inaccuracies or misunderstandings which arise through the translation.

Defects

UNDRIVEABLE CAR, Front right wheel gear failure - dismantled - the vehicle was driven with a permanently connected 4x4 drive, Cannot be started when connected to an external source - probably a fault in the electrical installation, Strong and deep corrosion and rotten in places, Deformation of the body, No battery, Long-term shutdown and inspection and commissioning necessary, Damaged front part from stones, Scratches on the body, Total corrosion of the bodywork, Cab deformation, Worn interior, Broken plastic parts, Damaged windshield from small stones, Surface corrosion of the bodywork, Operating clearance in the control, Operating clearance in the bearing, Strong corrosion of the bodywork, Oil leakage from hydraulics, Leaks of operating fluids, Due to long standing, some moving parts may be stiff or rusty, Soiled interior
This text has been translated using Google Translate. Veacom is not liable for any inaccuracies or misunderstandings which arise through the translation.

Inspection and location

Location
Mimoň Czech Republic

Dimensions

Dimensions of the car

Length
5250 mm
Height
2850 mm
Width
2480 mm

Weights

Vehicle weight

Operating mass
5190 kg
Maximum technically permissible mass
9200 kg
Maximum permitted mass
9200 kg

Combination mass

Maximum technically permissible mass
14200 kg
Maximum permitted mass
14200 kg

Acessories

4x4
Differential lock
Key
Towing hitch