LIEBHERR 932

The main defect of the machine is a cracked ring of rotation - when the tower was rotating, the locking pin of the rotation snapped (used in case of overloading), causing deformation around the locking pin and cracking of the ring. The pivot bearing (ring) is without much clearance, now the cracked ring is patched and welded (see photo). The turning function of the machine is flawless. The locking pin can be secured against falling out. Poor legibility of the dashboard in the cabin, the number of engine hours is not legible at all. Cracked sunroof. Some of the hydraulic hoses are frayed - most are factory original. Operational wear and damage, scratches on the body, surface corrosion of the body - corresponds to the old machine Worn and dirty interior in the cabin, broken plastic parts, operating clearances in the controls. The machine is without major clearances in the individual engagement of components (arms, supports, hydraulic cylinders,...). The hydraulic cylinders are without oil leakage, the piston rods are undamaged Minimal leaks of hydraulic oil and operating fluid - no oil stains are formed when the machine is shut down, the machine is rather dirty due to age and use. Alternator - v-belts are included, always turned, bearings do not make noise. At the moment, the functionality is not tested on the magnet. The machine is without grab and magnet. The red hook is not included in the sale. Since the machine is minimally used and functional as needed, any other defects are not known. Necessary personal testing of the machine. Later complaints will not be taken into account.
This text has been translated using Google Translate. Veacom is not liable for any inaccuracies or misunderstandings which arise through the translation.

Radio

4x4

Key